Glass Balustrade - Deck Mount
1. Choose Glass Panels
12mm toughened glass panels 970mm high, suitable for balconies, deck, outdoor and indoor applications.
2. Choose Glass Spigots
Heavy-duty duplex 2205 stainless steel spigots designed for secure and durable installation.
3. Choose Top Rails & Joiners
Stainless steel top rails and joiners provide added strength and a clean, modern finish.
4. Glass Clamps & Accessories
Optional glass clamps provide extra stability in high-wind or coastal areas, holding panels securely in place.
Shop frameless glass balustrade systems with 12mm panels, top rails and duplex stainless steel spigots. Fully compliant with AS 1288. Fast delivery across NSW & QLD.
-
Compliance Certificates
Balustrade Glass & Hardware Certification
Our balustrade glass panels are manufactured in accordance with AS/NZS 2208, ensuring they meet Australia’s requirements for safety glazing in building applications.
The complete balustrade system — including the spigots and glass configuration — is designed to comply with the AS1288-2021 balustrade standard for structural safety.Compliance documentation can be provided upon request for use in building approvals or certification submissions.
-
Frequently Asked Questions (FAQs)
NSW building rules require balustrades to achieve a minimum finished height of 1000mm.
Our 970mm balustrade glass panels sit on raised spigots, adding approximately 60mm, so the final installed height exceeds the required standard.
Gaps must not allow a 100mm sphere to pass through, as per safety regulations.
Most installers prefer a 30–60mm spacing for a balanced appearance and secure installation.
Yes — a continuous top rail is required when the balustrade is located above ground level.
Ground-floor balustrades generally do not require a handrail, but upper-floor or elevated decks must include one for compliance.
As soon as your order is ready, we will send you a "Ready for Pickup" email to let you know. If you place an order while the store is open, it will typically be ready for pickup within a few hours. If you place an order after your selected store has closed, your order will typically be ready for pickup shortly after the store opens the next morning. Store hours may vary by location.
Core drilling typically involves creating a 70–80mm diameter hole at a depth of 100–150mm, depending on your spigot model.
Once levels are checked, position the spigots and secure them using a non-shrink grout.
A common method is to place each spigot 200–300mm from the nearest edge of the panel.
You can also use a simple calculation: panel width ÷ 6 (e.g., a 1200mm panel ≈ 200mm).
Additional spacing rules:
- Maximum distance between spigots: 1200mm
- Panels larger than 1800mm should sit on three spigots
Typical lead times are:
- Sydney metro: 2–4 working days
- Central Coast & Wollongong : 3–5 working days
Large projects or peak-season orders may take slightly longer, and we confirm timing with each order.
Pricing varies based on the angle, shape, and panel width.
Send your drawing or measurement plan to sales@factoryonline.com.au, and we’ll prepare a custom quote.
Yes — we deliver using our own A-frame glass trucks, keeping every panel upright to minimise breakage.
This is much safer than pallet couriers, which often move glass flat and risk chipping or scratching.
Delivery zones include:
- Sydney
- central Coast
- Newcastle
- Wollongong
Brisbane metro: $89+GST
Central Coast & Wollongong: $155 + GST
Other areas: From $180 + GST (depending on location)
Yes. All glass panels, handrails and hardware items can be collected from our Yennora 2161 warehouse.
Please bring an appropriate vehicle and protective materials, as glass panels have not been cardboard-packed